10
GLOSSARy
Glossary
Endat
Bidirectional encoder interface of the
company Heidenhain
EtherCAT
Real-time Ethernet bus system of the
company Beckhoff
Ethernet
Real-time bus system - defines pro
-
tocols, plugs, types of cables
FE
Functional earth
FSoE
Functional Safety over Ethernet
FU
Drive converter
GND
Reference potential, ground
GTR7
Braking transistor
HF filter
High frequency filter to the mains
Hiperface
Bidirectional encoder interface of the
company Sick-Stegmann
HMI
Human machine interface (touch
screen)
HSP5
Fast, serial protocol
HTL
Incremental signal with an output
voltage (up to 30V) -> TTL
IEC
International standard
IP xx
Degree of protection (xx for level)
KEB product
The KEB product is subject of this
manual
KTY
Silicium temperature sensor (pola-
rized)
Manufacturer The manufacturer is KEB, unless
otherwise specified (e.g. as ma
-
nufacturer of machines, engines,
vehicles or adhesives)
MCM
American unit for large wire cross
sections
Modulation
Means in drive technology that the
power semiconductors are controlled
MTTF
Mean service life to failure
NN
Sea level
OC
Overcurrent
OH
Overheat
OL
Overload
OSSD
Output signal swithching device; - an
output signal that is checked in regu-
lar intervals on its shutdown. (safety
technology)
PDS
Power drive system incl. motor and
measuring probe
PE
Protective earth
PELV
Protective Extra Low Voltage
PFD
Term used in the safety technology
(EN 61508-1...7) for the size of error
probability
0V
Earth-potential-free common point
1ph
1-phase mains
3ph
3-phase mains
AC
AC current or voltage
AFE
From 07/2019 AIC replaces the pre-
vious name AFE
AFE filter
From 07/2019 AIC filter replaces the
previous name AFE filter
AIC
Active Infeed Converter
AIC filter
Filter for Active Infeed Converter
Application
The application is the intended use
of the KEB product
ASCL
Asynchronous sensorless closed
loop
Auto motor
ident.
Automatically motor identification;
calibration of resistance and induc-
tance
AWG
American wire gauge
B2B
Business-to-business
BiSS
Open source real-time interface for
sensors and actuators (DIN 5008)
CAN
Fieldbus system
CDF
Cyclic duration factor
CDM
Complete drive module including
auxiliary equipment (control cabinet)
COMBIVERT KEB drive converters
COMBIVIS
KEB start-up and parameterizing
software
Customer
The customer has purchased a KEB
product from KEB and integrates the
KEB product into his product (cus-
tomer product) or resells the KEB
product (dealer)
DC
DC current or voltage
DI
Demineralized water, also referred to
as deionized (DI) water
DIN
German Institut for standardization
DS 402
CiA DS 402 - CAN device profile for
drives
EMC
Electromagnetic compatibility
Emergency
stop
Shutdown of a drive in emergency
case (not de-energized)
Emergency
switching off
Switching off the voltage supply in
emergency case
EMS
Energy Management System
EN
European standard
Encoder emu-
lation
Software-generated encoder output
End customer The end customer is the user of the
customer product
Summary of Contents for COMBIVERT F5 Series
Page 2: ......