background image

2

Safety precautions

To avoid the possibility of causing injury to users or damage to properties, please follow all the 
explanations written below.

This symbol denotes 

an action that is 

COMPULSORY.

This symbol denotes 

an action that is 

PROHIBITED.

 WARNING

A state that may be caused by the mishandling of 
products, which, if not avoided, may lead to the 
possibility of death or serious injury of users.

Follow strictly all the instructions given in 
this manual for installation.
Electrical and installation work needs to be 
performed by a quali

fi

 ed individual.

Installation error can cause 

fi

 re, electrical 

shock, injury or Ceiling Fan to drop.

This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, 
or lack of experience and knowledge, 
unless they have been given supervision 
or instruction concerning use of the 
appliance by a person responsible for 
their safety. Children should be supervised 
to ensure that they do not play with the 
appliance.
Switch off the power supply and wait until 
the Blades is fully static, before cleaning 
or doing any maintenance jobs.

Can cause injury or electrical shock if Ceiling 
Fan move suddenly.
Kindly refer to your authorized dealer for 
repairing or maintenance.

Ensure that the Pipe has been fully tighten to 
Motor Shaft (Bolt tightening torque is 800 ~ 
1200 N·cm) and Cotter Pin must 

fi

 x into Bolt 

and bent.

Can cause injury if the Ceiling Fan drops.

Tighten the Blade Screws 

fi

 rmly using a 

screwdriver. (250-300 N•cm)

Can cause injury if Blade drops.

Ensure that the ceiling hook can sustain 
more than 10 times the Ceiling Fan weight.

Can cause injury if Ceiling Fan drops.

Ensure that the mounting of the 
suspension system shall be performed 
by the manufacturer, its service agent or 
suitably  quali

fi

 ed persons.

Can cause injury if Ceiling fan drops.

If unusual oscillating movement, any 
abnormality or failure occur is observed, 
imediately stop using and turn “OFF” the 
Miniature Circuit Breaker (MCB).

Risk of smoke, 

fi

 re, electrical shock or Ceiling 

Fan drops.
Please contact your authorized dealer for 
repairing or maintenance.

Dismantle the broken or damaged Ceiling 
Fan.

Can cause injury if Ceiling Fan drops.

Do not install the Ceiling Fan at oily and 
dusty places.

Can cause 

fi

 re or electrical shock due to short 

circuit.

Do not install the Ceiling Fan near 

fl

 ammable areas such as a gas cooker.

Can cause 

fi

 re or electrical shock due to short 

circuit.

Do not install the Ceiling Fan near 
chemicals and alkali.

Can cause 

fi

 re or electrical shock due to short 

circuit.

Do not damage the wire during installation 
e.g. deform due to heat, twist, bend, etc. 

Can cause 

fi

 re or electrical shock due to short 

circuit.

Do not use power supply other than rated 
voltage mentioned.

Overheating can cause electrical shock or 

fi

 re.

Do not hang onto the Ceiling Fan.

Can cause injury if Ceiling Fan drops.

Do not disassemble the Ceiling Fan unless 
stated by this manual.

Must use only supplied parts.
Can cause 

fi

 re, electrical shock, injury or 

Ceiling Fan to drop.

Do not touch the Ceiling Fan while it is 
operating.

Can cause injury, damage or Ceiling Fan to 
drop.

Do not sprinkle water to Ceiling Fan or do 
not wet the Ceiling Fan.

Can cause 

fi

 re or electrical shock due to short 

circuit.

Always follow these instructions

F48_56ZX_TZ_KDK.indd   2

F48_56ZX_TZ_KDK.indd   2

3/7/2018   3:42:49 PM

3/7/2018   3:42:49 PM

Summary of Contents for X48XG / X48XGMN

























Reviews: