23
⑤ Input panel
Display is changed by the
input mode switch key.
Operating cursor
On the QWERTY keyboard, there are no keys for moving the
cursor. To move the cursor, operate as follows. The same
operations are available on the number keyboard.
Press and hold the desired place in an entry
field
The color and form of the cursor ( ) change at the place you
press and hold.
Slide the finger where you want to move the
cursor to
The display of cursor changes and cursor moves to the
position you release the finger.
Tap operation input
On the number keyboard, tap a key which is allocated a
character you want to enter continuously until the target
character appears. When entering characters and
is
displayed, tap to display characters in the reverse order.
When entering Japanese by the QWERTY keyboard, enter by
Romaji input.
Entering with sliding operation
Press and hold a key to which a character you want to enter
is allocated to display input candidate. Slide to a character
you want to enter.
《Number keyboard》
《QWERTY keyboard》
IS12T̲BasicManual̲.indb 23
IS12T̲BasicManual̲.indb 23
2011/09/02 18:48:15
2011/09/02 18:48:15
