10
Charging
When you purchase IS12T the battery pack is not fully
charged. Be sure to charge the battery pack before use.
When the notification LED of IS12T flashes in orange, the
remaining battery level is less than 10 percent. Charge the
battery pack before use.
■ Charging times (approximate)
These times are to fully recharge the battery pack while
IS12T is turned off. The charging times increase if the
power is on or the temperature is low during charging.
Specified AC adapter
(sold separately)
Approximately 160 minutes
Common DC adapter 01
(sold separately)
Approximately 240 minutes
■ Adapter for charging
In addition, the specified AC adapter (sold separately) or DC
adapter (sold separately) is required.
◎ The common AC adapter 01 (sold separately) uses 100 VAC used
for households in Japan. Do not charge in single-phase 200 V
current or using an electric transformer for traveling overseas.
◎ The common AC adapter 02/03 (sold separately) supports 100
to 240 VAC. Use only the common AC adapter 02/03 (sold
separately) for charging overseas.
Charging using AC adapter
(sold separately)
The following describes how to charge the battery pack using
the common AC adapter 03 (sold separately). (Note that your
AC adapter may be different from the illustration.)
Connect the AC adapter to the microUSB
cable
Check the shape of the connector of the AC adapter to
connect.
Open the external connection jack cap of
IS12T
Connect microUSB cable to IS12T
Check the shape of the microUSB plug and external
connection jack to insert the plug straight.
microUSB cable
AC adapter
Notification LED
To power outlet
microUSB plug
External connection jack
IS12T̲BasicManual̲.indb 10
IS12T̲BasicManual̲.indb 10
2011/09/02 18:48:12
2011/09/02 18:48:12
