KCM 70Z7, Operation & Maintenance Manual

Page: 258 / 383

MAINTENANCE
7-17
Kind of Oils
Recommended Grease
Application
Manufacturer
Front Joint Pin, etc.
-20 to 45 °C (-4 to 113 °F)
British Petroleum BP Energrease LS-EP2
Caltex Oil Multifax EP2
Idemitsu Kosan Daphne Eponex SR2
Exxon Mobil Oil Mobilgrease XHP222 Special
Nippon OIL Epinoc Grease AP2
Shell OIL Shell Alvania EP2
JAPAN ENERGY *JOMO Lisonix Grease EP2
NOTE: Be sure to use a lithium-based grease for universal
joints and a propeller shaft spline. If other types of chassis
grease are used, premature wear and/or a noise emission may
result.
Use multipurpose-type EP/MOLY grease for most applications.
NLGI No. 2 grease is suitable for most temperatures. Use NLGI
No. 1 or No. 0 grease for extremely low temperature.
The machine shipped from factory is filled with lubricants
marked with
.
Recommended Engine Oil
IMPORTANT: Use engine oil equivalent to DH-2 specified
in JASO or CJ-4, API. Failure to do so may reduce the
engine performance and/or shorten the engine service
life. Please be noted that all engine failures caused
by using engine oil other than specified are excluded
from Kawasaki Warranty Policy. Consult your nearest
Kawasaki dealer for the unclear points.
Kind of Oil Engine Oil
Application
Manufacturer
Engine Crankcase
-20 to 20 °C (-4 to 68 °F) -15 to 40 °C (5 to 104 °F)
JASO
Hitachi Super Wide DH-2 10W-30 Super Wide DH-2 15W-40 DH-2
Exxon Mobil
Delvac 1300 Super (PROTEC ELITE 15W-40)
SAE 10W-30
Air Temp.