KCM 70Z7, Operation & Maintenance Manual

Page: 206 / 383

MOVING THE MACHINE
4-19
Parking
IMPORTANT: When parking the machine with cab door
and windows open, cab electrical components may be
damaged by bad weather. Always close windows, roof
vent and cab doors when parking the machine.
1. Stop and park the machine on level surface. Lower the
bucket to the ground.
2. Turn parking brake switch (1) ON.
IMPORTANT: This machine is equipped with a
turbocharged engine. Therefore if the engine is
stopped without first cooling down at low RPM’s,
the lubricant on the turbocharger bearing and seal
surfaces may be dissipated due to the intense heat
present inside turbocharger, possibly damaging the
turbocharger.
3. Run the engine at low idle speed to cool the engine for a
few minutes.
NOTE: Do not idle for excessively long periods. Observe local
and federal engine idling regulations.
4. Turn key switch (2) to OFF position to stop the engine.
Remove the key from the switch.
5. Press LOCK ( ) side of control lever lock switch (3).
6. Before leaving the machine, close and lock all the
windows, cab doors, and covers.
MNEC-04-002
Stop and Parking Position
1
2
MNEC-07-001
3
MNDB-01-001