KCM 70Z7, Operation & Maintenance Manual, Page: 234 / 383

TRANSPORTING
6-3
Loading / Unloading on Trailer
WARNING:
y
Keep machine straight while moving up or down a
ramp since turning on a ramp may cause the machine
to turn over. Never attempt to steer the machine on
a ramp. If the travel direction must be changed on
a slope, move the machine back to the flat ground.
Then, after changing the travel direction, begin to
move again.
y
Select AUTO 2 for auto-shifting, or select 2nd speed
for manual shifting.
Loading
1. Load the machine so that the centerline of the machine
aligns with the centerline of the trailer flatbed.
2. Slowly move the machine on the ramp.
3. Lower the bucket onto the trailer deck.
4. Stop the engine.
5. Operate the control lever several strokes to relieve
pressure in the cylinders.
6. Move the control lever lock switch in the LOCK ( )
position.
7. Remove the key from the key switch.
8. Securely close the windows and cab doors to protect the
cab from rain. Cover the exhaust outlet. Failure to do this
will damage the engine.
9. Install the articulation lock bar (1) to prevent the
machine from articulating.
MNEC-07-004
1