V3.00
KBR multimax 3D6
EDEBD
A0210-3313-1_EN
7
Introduction
1.4
Safety notes
In order to prevent operating errors, operation of this device is kept as simple as
possible. This way, you will be able to quickly start working with the device.
In your own interest, however, you should read the following safety notes
carefully. During assembly, the applicable DIN / VDE regulations must be
observed!
Power supply connection, setup and operation of the device must only be
performed by qualified personnel. Qualified personnel in accordance with the
safety notes in this user manual are persons authorized to setup, ground and
mark devices, systems and circuits in accordance with all applicable standards
and regulations.
To avoid the hazard of fire and electrical shock, the device must not be subject
to rain or other humidity!
Before the device is connected to its power supply, you will have to check
whether the local power supply conditions comply with the specifications on
the manufacturer’s label.
A wrong connection may destroy the device!
When connecting the device, observe the connection chart (see chapter
“Connection chart”) and make sure that no voltage is applied to the connection
lines. Only use proper wiring material and watch the correct polarity when
wiring!
In order to ensure proper and safe operation of the product, it must be trans-
ported, stored, installed and mounted in accordance with the specifications
and operated and maintained carefully.
A device showing visible damage must by all means be considered as unfit for
operation and must be disconnected from the power supply!
Error detection, repairs and maintenance work may only be carried out in our
facilities or after contacting our service team. Every warranty obligation of the
manufacturer expires if the device is opened without written consent from our
service team. Proper operation can no longer be guaranteed!
Opening the device may expose parts under voltage. Capacitors in the device
may still be loaded, even if the device has been disconnected from all voltage
sources. It is generally not allowed to operate an open device!
Caution
