V3.00
KBR multimax 3D6
EDEBD
A0210-3313-1_EN
39
System operation
8.2
Module management
In the module management area, you can manage and configure basic and
additional modules.
Select
Main menu > Module management > Enter
.
Select a module.
CAUTION: If required, start a module scan using
scan
. This function detects
connected modules, however only one after the other and only if they are set to
scan mode.
Select a module from the list and start the configuration with
Para
.
Para. Module (0,
1, 2,...)
Programming
Explanation
Timeout
Numerical value
in
sec
Defines the time permitted for
feedback of the module in network
operation. This is especially useful in
slow networks, in order to prevent
unnecessary error messages.
Flashing
on / off
Makes the LEDs on the selected
module flash one after the other,
to be able to allocate a connected
module to its number.
Removal
on / off
Logs an additional module
off from the basic module.
8.3
I/O parameters
In the I/O parameters area, you can define and configure inputs and outputs.
1.
Select Main menu > I/O parameters > Enter.
2.
Select an input or output from the list and define it with Edit.
Inputs available are synchronous input, tariff input, digital input and pulse
counter input.
Outputs available are relay output, alarm output, limit message output and
digital output.
3.
Select an input or output from the list and start the configuration with Para.
