37
Operation and Service KBL 5600
Connecting an external audio
source
When connecting an external audio source, pay
attention to the correct polarity.
R-
green
Wiring on the audio equipment’s side
yellow
white
brown
R+
L-
L+
Level adjustment
The voice/audio system components are built into
the base part (in the head area) of the tanning
unit. The total level adjustment is carried out via a
potentiometer (see arrow) that is located on the audio
switch circuit board.
Operation using different audio
sources
The tanning unit can be operated using the following
audio sources:
•
An internal MP3 player alone
•
An external audio source alone
•
Both audio sources
Use the control panel to alternate between internal
and external audio source.
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks on
the SD card.
EXTERNAL AUDIO SOURCES
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
•
the studio music, and
•
external players such as MP3 players, mobile
phones (cell phones), iPods, etc.
EXTERNAL AUDIO SIGNAL 100 V
(OPTIONAL FEATURE)
A transformer (KBL item no.: 9100 0170 00) is
required for the transmission of the audio signal if a
100 V audio system is connected.
The connection must be carried out by trained service
staff.
Summary of Contents for megaSun 5600
Page 1: ...Operating and Maintenance KBL 5600 BA_5600_US_L 0707...
Page 56: ......