KBL megaSun 5600, Operating And Maintenance

Page: 12 / 56

12
Operation and Service KBL 5600
aquaCool*
Off ON
Facial tanner/
Shoulder tanner
(optional feature)
The control of the shoulder tanner is coupled to the face tanner.
The shoulder tanner is switched on whenever the facer tanner is
activated but its power cannot be turned down. As soon as the face
tanner is switched off, the shoulder tanner is turned off as well.
Important: Do not operate the shoulder tanner without lamp
unit.
Level II Once the tanning program has been started, the facial
tanners are automatically switched on at maximum
setting.
Level I To reduce the output to level I, use the field “–”.
Level 0 To switch off the facial tanners completely, touch the “–”
field again for at least 3 seconds.
By touching the “+” field you can switch the facial tanners on
again or you can increase their output.
When the system has been switched off, there will be a time lag
before you can switch it on again due to the necessary cooling
of the burners.
Here you can activate the aquaCool water-atomisation func-
tion (plus button, symbol fl ashes) or deactivate it (minus button,
symbol does not fl ash). Default setting at start: as defi ned on
service level I in the AAC/Aqua menu.
• If the aquaCool supply is running low, the message Aqua low
is shown on the display between the tanning sessions. When
the message appears for the fi rst time, the aquaCool supply
will last approx. another 2.5 hours of operation with aquaCool.
• If the aquaCool supply is empty, the message Aqua 0% ap-
pears and the symbol is crossed out. If the system is to be
used without aquaCool, you can switch off the messages
and the symbol. For this purpose, set the submenu Aqua
to “OFF”. To reach this menu, proceed to the AAC menu on
service level II.
Water tank is
empty
* this is only preset if the feature is ordered