Kaysun Zen On 2014, Service Manual

Page: 108 / 116

Controller
102 Electrical Control
3.2.2 Installation accessory
Select the installation location
Don’t install at the place where contents with heavy oil, vapor or sulphurous gas,
otherwise, this product would be deformed that would lead to system malfunction.
Preparation before installation
1. Please confirm that all the following parts you have been supply.
2. Please filed install the following accessory.
Precaution of install the wire control
1. This manual provides the installation method of wire controller. Please refer to the wiring diagram of
this installation manual to wire the wire controller with indoor unit.
3. The Shielded wire of the wire controller must be grounded reliable.
4. After finishing the wire controller connection, do not employ a tramegger to detect the insulation.
2. The wire controller working in low voltage loop circuit. Avoid to directly contact the cable of
220Vcommercial electricity or of 380V high voltage, and don’t wire this kind of wire in the said loop;
wiring clearance between configured tubes should at the range of 300~500 or above.
3.2.3 Installation method
Simplified schematic of wire controller
Installation diagram