Ka
ysun Amaz
on Unit
ario T
op Dischar
ge Engineering Da
ta Book
Amazon Unitario Top Discharge
182
Amazon Unitario Top Discharge Series System Commissioning Report – Sheet D
Project name and location
System name
Observed values
DSP1
content
Parameters displayed on DSP2
Remarks
Cooling
mode
Heating
mode
0.--
Unit address
Amazon Unitario Top Discharge series
outdoor unit: 0
1.--
Unit capacity
Refer to Note 1
2.--
Number of outdoor units
Amazon Unitario Top Discharge series
outdoor unit: 1
3.--
Number of indoor units as set on PCB
Actual value = value displayed
4.--
Total capacity of outdoor unit
5.--
Total capacity requirement of indoor units
6.--
Outdoor unit output metric
7.--
Operating mode
Refer to Note 2
8.--
Outdoor unit actual operating capacity
9.--
Fan A speed index
Refer to Note 3
10.--
Fan B speed index
Refer to Note 3
11.--
Indoor heat exchanger pipe (KPDF/T2B) temperature (°C)
Actual value = value displayed
12.--
Main heat exchanger pipe (T3) temperature (°C)
Actual value = value displayed
13.--
Outdoor ambient (T4) temperature (°C)
Actual value = value displayed
14.--
Plate heat exchanger cooling refrigerant inlet (T6A) tempera-
ture (°C)
Actual value = value displayed
15.--
Plate heat exchanger cooling refrigerant outlet (T6B) tem-
perature (°C)
Actual value = value displayed
16.--
Inverter compressor A discharge temperature (°C)
Actual value = value displayed
17.--
Inverter compressor B discharge temperature (°C)
Actual value = value displayed
18.--
Inverter module A heatsink temperature (°C)
Actual value = value displayed
19.--
Inverter module B heatsink temperature (°C)
Actual value = value displayed
20.--
Plate heat exchanger cooling refrigerant outlet temperature
minus inlet temperature (°C)
Actual value = value displayed
21.--
Discharge superheat degree
(°C)
Actual value = value displayed
22.--
Inverter compressor A current (A)
Actual value = value displayed
23.--
Inverter compressor B current (A)
Actual value = value displayed
24.--
EXVA position
Refer to Note 4
25.--
EXVB position
Refer to Note 4
26.--
EXVC position
Refer to Note 4
27.--
Compressor discharge pressure (MPa)
Actual value = value displayed × 0.1
28.--
Reserved
29.--
Number of indoor units currently in communication with
master unit
Actual value = value displayed
30.--
Number of indoor units currently operating
Actual value = value displayed
31.--
Priority mode
Refer to Note 5
32.--
Silent mode
Refer to Note 6
33.--
Static pressure mode
Refer to Note 7
34.--
Reserved