www.kayomoto.com
- 69 -
Inspection of oil filter parts, oil filter
1.
Check the cleanliness of oil filter parts, oil filter screen; for poor cleanliness of oil filter parts, oil filter screen
should be washed with clean gasoline ;
2. Check the oil filter parts, oil filter screen there is damage phenomenon; if there is damage phenomenon need
to replace the new oil filter parts, oil filter screen.
Assembly of transmission, crankshaft and balance shaft
1.
The crankshaft and balance shaft are installed in the
corresponding hole of the left body.
2.
The main and counter shaft components are installed in the
corresponding hole of the left body, and then the dial fork is
assembled to the corresponding position.
Note
：
1.
The fork marked - R is mounted on the right side of the
counter shaft ;
2.
A The fork marked - L is mounted on the left side of the
counter shaft ;
3. The fork marked - C is mounted on the main shaft.
3. Put the transmission hub into the corresponding hole of the left body, then
assemble the other end of the fork into the corresponding slot of the variable speed
drum, and finally install the fork shaft into the corresponding fork.
Note
：
The long fork shaft passes through the fork marked - R
、
marked - L, and the short fork shaft passes through the fork
marked - C.
Assembly of box and oil Filter
1.
Daub a layer of sealant evenly on the surface of the
right box body, put the positioning pin into the
corresponding hole of the left box body, close the right
box body to the left box body.
Get 5pcs of GB/T1667416674 small plate bolts
M6×45 and 8pcs of GB/T16674 small plate boltsM6×65
through the corresponding bolt holes in the left body
and fasten them.
Fastening torque
：
11
～
13 N·m.
2. Mount the oil filter parts into the corresponding
holes of the box.
Oil filter close end
