www.kayomoto.com
- 59 -
Assembly of free-wheeling clutch
Install the wedge on the outer cover of the free-wheeling clutch. When assembling, please note not to reverse the
wedge.
Installation of starting gear and overrunning clutch
1.
Install the big gear washer to the right crank.
2.
2. Install the big gear and free-wheeling clutch to the right crank.
Note:
Daub a layer of grease evenly on the
inner hole of the starting gear before
installing the starting gear.
Installation of active teeth
1. Install the active tooth to the right crank ,
2, Install the active tooth locking nut washer to the active tooth ,
3.Daub 3~4 thread fastening glue to the active tooth locking nut then install it to the right crank and fasten it.
Note:
Fastening torque of active tooth locking nut: 150
～
160N·m
Installation of clutch
1. Install the clutch cover washer, clutch shaft sleeve, clutch cover and clutch center sleeve washer to the spindle;
Note:
Daub grease evenly on inner ring of clutch sleeve
2. First,install the clutch center sleeve, clutch lock nut washer into the spindle, then,daub the 3~4 thread
fastening glue on the clutch lock nut, mount it on the spindle and fasten it;
Note:
Fastening torque of clutch locking nut
：
80
～
90N·m
3. First, put the clutch friction disc into the clutch center sleeve and clutch outer cover. Then mount the clutch
push rod into the center hole of the spindle. Third,install the clutch pull rod into the center hole of the spindle, and
mount the thrust bearing and the pull rod washer into the pull rod,
4. Install the clutch press disc, clutch press disc spring and pressure plate screw,fasten the screw with a torque
spanner. Fastening torque
：
8
～
10N·m
Assembly of starting motor
