www.kayomoto.us
- 13 -
8
、
check tire pressure
Use the pressure gauge to check whether the tire pressure level is in line
with the standard of this motorcycle, if there is often a small pressure
problem, check the tire flats and any punctures .
recommended pressure
Front :1 bar
（
15PSI
）
rear :1bar
（
15PSI
）。
Note:
the check of the tire pressure should be done under cool conditions.
9. Check spoke tension
Pinch the two adjacent spokes with your fingers to check whether there is
a lack of tension in the spokes. If the spokes are found loose wheel truing
and tightening may need to be performed..
NOTE: spoke tensioning and truing should be performed by a professional
10.
Check the chain and its supporting parts
Check chain tension. If the chain is too loose, it can be adjusted by
loosening the rear axle and adjusting the chain adjusters. Do not make the
chain too tight.
Note:
if the chain needs to be tensioned frequently, or if you find any
signs of wear on the front sprocket, rear sprocket and chain replace
immediately.
11
、
Check whether the front shock needs to vent.
When the environment temperature is high, the gas in the shock is heated
and expands. At this time, it is necessary to conduct the exhaust operation.
Otherwise, damage the oil seal may occur, which will affect the use of the
shock.
12
、
Inspection of the remaining
components
Visually inspect the entire
motorcycle for loose parts. Tighten
any loose bolt or parts
○
1
○
2
