www.kayomoto.us
- 24 -
accidents. The replacement should be carried out after consulting the
dealer of KAYO.
17
、
brake fluid
The brake fluid must be checked and replaced periodically. If the brake
fluid is mixed with water, soil or other particles, the brake fluid should
also be replaced.
DOT4 brake fluid is recommended.
Danger: do not mix different types of brake fluid into the brake system for
use. Brake fluid must be used to meet braking requirements. Please do not
use brake fluid from an unsealed container, as the brake fluid is
susceptible to deterioration due to exposure to air, thus affecting the
braking effect. Do not use used brake fluid.
18
、
brake fluid quantity inspection
Observe hole
①
and hole
②
, check the brake fluid level.The level should be
more than half of the observation hole, i.e. the level should be higher than
"LOWER".If the brake fluid is insufficient, it should be added
immediately.
Note:
do not let brake fluid splash on the paint surface, easy to cause
corrosion.
Danger:
please pay attention to check the leakage of brake fluid and the
damage of brake fluid pipe.If there is any leakage problem, please contact
the distributor of KAYO.
19
、
Check brake pump piston and dust cover
Regarding the inspection, adjustment and replacement of this project,
please consult with the distributor of KAYO.
20
、
Spokes and wheels
The spokes should be tightened to avoid tyre centre deviation.If the tire
center is deviated, it will elongate the spokes, easy to make it deformation
or even fracture.
If the tire center is found to be slightly off-center on inspection, it can be
adjusted by loosening or tightening some spokes with a tensioning
wrench.If the tire is bent or severely deformed, replace the tire
immediately.
Warning:
the inspection and adjustment of spokes and wheels requires
professional knowledge. We recommend that you consult with KAYO
dealer or do it at dealer’s place.
21
、
Check the chain guide
Check the wear of guide sleeve
③
and chain stopper
④
on the swing
arm.Under normal condition, these two parts can guide the chain
movement, if the wear is too much, it is not conducive to the normal
movement of the chain, will affect its rotation.Therefore, the worn chain
guide sleeve and chain stopper should be replaced in time to ensure the
normal operation of the motorcycle.
22
、
Check the front shock absorber
○
1
Error!
○
3
○
4
