![background image](http://html1.mh-extra.com/html/kawneer/1686/1686_installation-instructions-manual_3677099005.webp)
kawneer.com
Kawneer r
eserves the right to change configuration without prior notice when deemed
necessary for pr
oduct impr
ovement.
© Kawneer Company
, Inc., 2013
Laws and building and safety codes gover
ning the design and use of glazed
entrance, window
, and curtain wall pr
oducts vary widely
. Kawneer does not contr
ol
the selection of pr
oduct configurations, operating har
dwar
e, or glazing materials,
and assumes no r
esponsibility ther
efor
.
5
038310
EC 95424-057
KAWNEER 1686 CONCEALED EXIT DEVICE
INSTALLATION INSTRUCTIONS
FEBRUARY, 2015
EXIT DEVICE WITH CYLINDER DOGGING
1) Install pivot stile filler plate into exit device.
2) Install cylinder as pictured, making sure cylinder is tight against filler plate.
MAKE SURE CYLINDER IS ORIENTED AS PICTURED
3) Tighten set screw in dogging mechanism with a phillips head screw driver, through hole in end of base
bracket.
DO NOT OVER TIGHTEN SET SCREW
DEVICE ATTACHMENT:
1) Undog exit device before attaching to door.
2) Attach exit device onto pivot stile and lock stile of door with fasteners provided, as indicated below.
3) Install cover brackets (on top & bottom of device) onto exit device with fasteners provided.
Pivot Stile Fastener
1/4-20 x 1/2" PHMS
End Cap Bracket
Lock Stile Fastener
#12-24 x 1-1/4" PHMS
Lock Stile Fastener
#8-32 x 1-1/4" Cap Screw
Install
Cover Bracket
and Fastener