kawneer.com
Laws and building and safety codes gover
ning the design and use of glazed
entrance, window
, and curtain wall pr
oducts vary widely
. Kawneer does not contr
ol
the selection of pr
oduct configurations, operating har
dwar
e, or glazing materials,
and assumes no r
esponsibility ther
efor
.
Kawneer r
eserves the right to change configuration without prior notice when deemed
necessary for pr
oduct impr
ovement.
© Kawneer Company
, Inc., 2013
2
038310
EC 95424-057
15/16"
3/8"
#8-32 x 1-15/16" FHMS
KAWNEER 1686 CONCEALED EXIT DEVICE
INSTALLATION INSTRUCTIONS
FEBRUARY, 2015
CYLINDER PAD ASSEMBLY:
1) Insert a 15/16" cylinder into the mounting pad and secure with the retaining ring.
Note: If using a cylinder longer than 15/16", cylinder
rings will be required to maintain the 3/8" projection.
Cylinder
Mounting Pad
15/16" Cylinder
with 0.800" cam
Retainer
Ring
Insert cylinder assembly
into cutout.
CYLINDER INSTALLATION:
1) On exterior side of door, install the cylinder assembly into cutout on the door stile.
2) On interior side of door, install (2) #8-32 x 1-15/16" FHMS through door stile to secure cylinder assembly in position.
3) Cylinder assembly should be tightly secured to ensure that mounting pad is placed square upon door stile and cannot be moved.
4) Once the center case assembly and mounting pad is secured on the active door stile, insert cylinder key and turn counterclockwise to
deactivated exterior cylinder dogging mechanism.
