KaVo KEY Laser 3+ 1343 Instructions For Use Manual Download

Page: 18 / 80

2.4.1

Warning lamps

In the planning stage, make sure that warning lights are installed at all entrance

doors to the treatment rooms in which the KEY Laser 3+ / III upgraded is operated.

If possible, install the electronics as follows:

The warning lights operate when power is applied to the socket for the KEY Laser

3+ / III upgraded.

The warning lights must be installed by a professional electrician.

Note
The warning lamps are not included with the delivery of the KEY Lasers 3+ / III

upgraded.

2.4.2

Warning signs

The current warning signs are to be affixed at eye height to the entrance doors to

the treatment room in which the KEY laser 3+ / III upgraded is used and be visible

from the outside.

Note
The warning signs are included in the accessories.

Summary of Contents for KEY Laser 3+ 1343

















































































Search results

Summary of Contents for KEY Laser 3+ 1343

Reviews:

Related manuals for KEY Laser 3+ 1343

Brands by name

Popular brands

KaVo KEY Laser 3+ 1343, Instructions For Use Manual

Search results

Summary of Contents for KEY Laser 3+ 1343

Reviews:

Related manuals for KEY Laser 3+ 1343

Brands by name

Popular brands