4
TROUBLESHOOTING
MINIDUMPER
CARRY 110
36
4
TROUBLESHOOTING
4.1
TROUBLESHOOTING TABLE
Note down anything abnormal in the machine’s daily operation.
Try to determine the cause of all anomalies, and take immediate action to remedy them.
If anomalies are not dealt with as soon as possible, they may lead to more serious problems in the future.
PROBLEM
PROBABLE CAUSE
REMEDY
Control valve lever hard
to operate or does not
return of its own accord.
•
Interference with the panel
•
Control valve fault.
•
Adjust assembly
•
Request assistance service.
No movement possible,
power lacking.
•
Insufficient hydraulic fluid.
•
Hydraulic fluid filter blocked.
•
Engine power low.
•
Pump or coupling fault.
•
Adjuster valve pressure low.
•
Defective control valve.
•
Top up to level.
•
Service fluid filter.
•
Service air cleaner, check fuel supply and
water separator.
•
Request assistance service.
•
Request assistance service.
•
Request assistance service.
Drive on one or both
sides lacking.
•
Foreign body - rock or some such -
jammed in track.
•
Poor drive motor operation.
•
Brake fault
•
Remove jammed material.
•
Request assistance service.
•
Request assistance service.
The machine does not
steer straight.
•
Jamming in tracks.
•
Track tension not even on both sides.
•
Pump fault
•
Servocontrol fault.
•
Drive motor failure.
•
Remove jammed material.
•
Adjust the tension on both sides.
•
Request assistance service.
•
Request assistance service.
•
Request assistance service.
No shovel raise power.
•
Hydraulic fluid insufficient.
•
Adjuster valve pressure low.
•
Control valve damaged.
•
Hydraulic cylinder fault.
•
Top up to level.
•
Request assistance service.
•
Request assistance service.
•
Request assistance service.
Tools move in the
opposite direction to
that shown on their
stickers.
•
Snap fittings mounted in reverse
•
Swap the snap fittings around
4.2
SPARE PARTS
R
EPLACE WORN AND DAMAGED PARTS WITH ORIGINAL
KATO
IMER
SPARE PARTS
.
U
SING NON
-
ORIGINAL SPARE PARTS CAN CAUSE DAMAGE AND INJURY
.
KATO
IMER
IS NOT LIABLE FOR DAMAGE CAUSED BY THE USE OF NON
-
ORIGINAL SPARE PARTS
,
UNLESS
EXPRESSLY AUTHORISED
.
WARNING
I
T IS FORBIDDEN TO MAKE CHANGES OF ANY SORT TO THE STRUCTURE AND THE PLANT DESIGN OF THE
MACHINE BECAUSE THIS MAY COMPROMISE ITS SAFE USE
.
WARNING
Summary of Contents for CARRY 110
Page 2: ......
Page 49: ...TRACKED MINIDUMPER CARRY 110 PUBLISHED MARCH 2017 KATO IMER S p A ITALY ...
Page 50: ......
Page 51: ......