3
MAINTENANCE
MINIDUMPER
CARRY 110
21
3
MAINTENANCE
3.1
MAINTENANCE INTERVALS
Check Point
Service
Whenever necessary
Tracks
Check and adjust tension
Fuses
Fuses maintenance
Battery
Clean and check acid level
Parts with grease points
Grease
Daily (every 8 hours of operation)
Diesel engine
Check the oil level
Hydraulic Fluid Tank
Check the hydraulic fluid level
Fuel tank
Check the fuel level
Inspection
Check the overall condition of the machine
Air cleaner
Check visual blockage indicator
Engine
Check fuel sludge filter water level
Hydraulic System
Check filter
Radiator
Check coolant level
Radiator
Check cooling fins for blockage
Every 250 hours of operation (before the above service jobs)
Engine
Oil change
Air cleaner
Replace filter element
Travel reducer gear
Check oil level
Every 600 hours of operation (before the above service jobs)
Hydraulic System
Change fluid and clean filter element
Travel reducer gear
Change reducer casing oil
Engine coolant
Change coolant
The above intervals depend on the conditions in which the machine is working: very dusty conditions
require more frequent air cleaner services.
3.2
TABLE OF LUBRICANTS
Position
Quantity
Features
YANMAR engine
3TNM68
1.2 litres
2.6 litres (WITH FILTER)
SAE 20W40
HYDRAULIC FLUID
Total quantity 25 litres Tank capacity
19 litres
LONG LIFE HYDRAULIC FLUID
ISO N° 46
GENERAL LUBRICATION POINTS
-
EP-2 lithium grease
DRIVE MOTORS
0,30
litres each
REFER
TO
THE
ENGINE
MANUAL
FOR
SERVICE
INSTRUCTIONS
WARNING
Summary of Contents for CARRY 110
Page 2: ......
Page 49: ...TRACKED MINIDUMPER CARRY 110 PUBLISHED MARCH 2017 KATO IMER S p A ITALY ...
Page 50: ......
Page 51: ......