Kato Imer CARRY 110, Operating Instructions Manual, Page: 31 / 51

3 MAINTENANCE
MINIDUMPER
CARRY 110
23
3.3.4 FUSES MAINTENANCE
FUSES
The fuse box (1) is located on the controls panel.
The fuses protect the electrical circuit from damage due to
overloads and short circuits.
Always replace fuses with equivalently rated units of the
same size.
Before replacing a fuse, find the reason for its failure and
repair the damage
REPLACING FUSES
1. Release and remove the fuse cover.
2. Change the damaged fuse with a new one
We list below the circuits protected by each fuse and their
amperages:
1. Engine stop solenoid, timers, hourmeter. - 30A
2. double speed switch, oil and water sensor - 10A
3. Generator - 10A
MAIN FUSE
A fuse (2) is located between the positive terminal and the
key switch to protect the cabling against short circuits. In
case of power failure, check this fuse and identify and resolve
the short circuit before replacing it if it has tripped.
2
1
30 A
10 A
10 A
•
B
EFORE SERVICING ANY LIVE
(
ENERGIZED
)
PART
,
REMOVE THE FUSE FROM ITS HOUSING TO ISOLATE
THE BATTERY CIRCUIT
.
WARNING