EVM Modules of the MS Series Technical Introduction and User’s Guide
56
-
If you dial
6,
then
starting from the moment you are in, the voice
level of the message is decreased by one unit and you go on
listening to the message.
-
If you dial
8,
then you lock the message you are listening to at that
moment (if you have the required authorization) so that it is not
erased until you listen to it again, and then you proceed to the next
message.
-
If you dial
9,
then you erase the current message and proceed to the
next one.
External Call Record:
You can record a phone conversation you are making, if you have the
authorization.
In order to record a conversation you are making:
A
While making conversation over an external line, make
hook flash
B
Dial your own extension number.
A
Then make hook flash again
F
Recording of your conversation begins after the beep
tone.
Notes:
1.
If the entire channels of the EVM are busy at that moment, then
you
receive the error tone. In that case, you can revert to your conversation
by making hook flash again.
2.
There is no time limit for recording a conversation. However, in the
event that the memory of the EVM overflows, the recording and the
conversation are terminated automatically. In that case, you can make
hook flash twice, consecutively, in order to maintain the conversation.
3.
If you make hook flash during recording, then the recording halts, you
can revert to the conversation by making hook flash again.
4.
At any moment throughout the conversation, you can resume recording
by making hook flash and entering your extension number, again.
5.
You can listen to the recorded conversations by dialing the code “8646.”
Nevertheless, the conversations are automatically erased 15 minutes
after they are listened to.
PDF created with pdfFactory Pro trial version
