EVM Modules of the MS Series Technical Introduction and User’s Guide
38
14, “You Do Not Have Authorization For This Service” (Authorization
Not Appropriate For Service) Message :
This message is announced
when an extension dials a service code, for which s/he has no authorization.
15, “There Is No Line You Can Pick Up” (No Line To Pick Up) Message
:
This message is announced when an incoming external line call is
attempted to be picked up, even though there is actually no such call.
16, “The System Is Not In Programming Mode” (Programming Mode
Status) Message :
This message is announced upon an program entry
attempt while the system is not in programming mode.
17, “The Entire Lines Are Out Of Service” (All-Lines Service Status)
Message :
This message is announced when the system supervisor
extension lifts the handset while the entire lines are out of service.
18, “The Telephone Is Locked” (Locked Phone) Message :
This
message is announced when the system programming initiation code is
dialed while the system supervisor extension phone has been locked.
19, “You Have Performed An Incorrect Operation” (Error) Message:
This message is announced when an invalid operation code is dialed.
20, “You Have Entered A Wrong Password” (Wrong Password)
Message :
This message is announced when the password is entered
incorrectly during password change, telephone locking and unlocking
operations.
21, “There Is No Available Auto-Dialer Service” (No Available Auto-
Dialer) Message :
This message is announced when the auto-dialer is
employed while the entire auto-dialer services of the system are busy (if the
auto-dialer has been activated by 4 extensions at the same time).
22, “No Password Has Been Defined” (No Password) Message :
This
message is announced when an operation, which requires a password is
done (telephone lock, programming mode entry). while there is no password
that has yet been defined.
PDF created with pdfFactory Pro trial version
