![background image](http://html.mh-extra.com/html/karcher/km-105-100-r-d/km-105-100-r-d_manual_655718042.webp)
-
15
Park the sweeper on an even surface.
Turn the program selection switch to
"OFF".
Remove KIK-key.
Activate parking brake.
Allow device to cool down sufficiently.
Please observe the following warning notes
when handling batteries:
DANGER
Risk of fire and explosion!
Risk of explosion! Do not put tools or
similar on the battery, i.e. on the termi-
nal poles and cell connectors.
Smoking and open flames must be
strictly avoided.
Rooms where batteries are charged
must have good ventilation because
highly explosive gas is emitted during
charging.
몇
WARNING
Risk of injury!
Ensure that wounds never come into
contact with lead. Always clean your
hands after working on batteries.
Danger of causticization!
Rinse thoroughly with lots of clear water
if acid gets into the eye or comes in con-
tact with the skin.
Then consult a doctor immediately.
Wash off the acid If it comes in contact
with the clothes.
Change clothing.
Park the sweeper on an even surface.
Connect air pressure testing device to
tyre valve.
Check air pressure and adjust if re-
quired.
For permissible tyre inflation pressure
see Chapter "Technical specifications".
몇
WARNING
Risk of injury!
Check stability of ground. Park the vehi-
cle on stable grounds only, additionally
secure it against rolling away by means
of a wheel chock.
ATTENTION
Use a suitable commercially available vehi-
cle jack.
Park the machine on an even surface.
Check stability of ground. Lock the ap-
pliance to ensure that it does not roll off.
Place the jack at the relevant position
point.
Loosen the wheel nuts/wheel bolts by
about 1 revolution using a suitable tool.
Raise machine using vehicle jack.
Unscrew the wheel nuts/wheel bolts
and remove them.
Remove wheel.
Have a defective wheel repaired or re-
placed in a specialist workshop.
Place the wheel and screw in the wheel
nuts/wheel bolts all the way; tighten
them lightly.
Lower machine using vehicle jack.
Torque the wheel nuts/wheel bolts to
the required torque.
Contact the customer service for the re-
moval of the front wheel.
Do
not
sit down on the driver seat.
Turn the programme selector switch to
position C (drive).
If the message >
Please sit down on
the machine
< appears on the display,
the safety function is given.
DANGER
Risk of burns on account of hot surfaces!
Park the machine on an even surface.
Allow engine to cool down.
Wait for at least 5 minutes after switch-
ing off the engine before checking the
engine oil fill level.
Open the engine hood.
Figure: Petrol/gas engine (KM 105/...)
Figure: Petrol/gas engine (KM 125/...)
Figure: Diesel engine (KM 105/...)
Figure: Diesel engine (KM 125/...)
1 Oil dipstick
2 Oil filling nozzle
3 Oil drain hose with clamp
4 Oil drain plug
Pull out oil dipstick.
Diesel engine
: Wipe off oil dipstick and
insert it completely.
Petrol / gas engine
: Wipe off oil dip-
stick, insert towards the edge of the
opening, but do not insert it completely.
When inserting the dipstick ensure that
you insert it the correct way round in the
opening (max-min dashes in the direc-
tion of the engine).
Figure: Oil level measurement on a petrol/
gas engine (KM 105/... und KM 125/...)
Remove the oil dip one more time and
check the oil level.
– The oil level must lie between “MIN“
and “MAX“ marking.
– Add motor oil if the oil level is below the
"MIN" marking.
– Do not fill oil above the "MAX" marking.
Fill motor oil into the oil fill neck.
Note
: For filling in the motor oil, use ac-
cessories such as a bent funnel tube or
an oil-change pump 6.491-538.
For oil type refer to Chapter "Technical
specifications".
Wait at least 5 minutes.
If the engine oil level is correct, insert
the oil dipstick.
몇
WARNING
Risk of burns!
To change the motor oil and motor oil
filter, allow the vehicle to cool down until
there is no longer a risk of burns.
Allow engine to cool down.
Open the engine hood.
Ready a catch bin for appr. 1 litre oil.
Release the clamp on the oil drain
hose, pull out the oil drain plug and
drain the oil completely.
Reinsert the oil drain plug and tighten
the clamp.
Preparation
Safety notes regarding the batteries
Check the tyre pressure
Remove rear wheel
Tightening torque (Nm)
56 Nm
Removing the front wheel
Check the function of the seat contact
switch
Check engine oil level and top up, if
required
Change the motor oil and the oil filter
42
EN
Summary of Contents for KM 105/100 R D
Page 2: ...2 ...