![background image](http://html.mh-extra.com/html/karcher/km-105-100-r-d/km-105-100-r-d_manual_655718034.webp)
-
7
1 Main switch
Position 0
: Appliance is decommis-
sioned
Position I
: The appliance is ready for
operation.
2 Button suction blower with indicator
lamp
Lamp is illuminated
: Suction blower
and filter dedusting deactivated:
– for sweeping damp or wet floors, or fi-
brous dry waste such as straw, hay, etc.
Lamp off
: Suction blower and filter de-
dusting activated (default):
– for sweeping dry floors
3 KIK-key (
K
ärcher
I
ntelligent
K
ey)
yellow - operator
grey - supervisor
4 Display sweeping programme "ECO"
– for even floors with minor soiling
Note
: This sweeping programme is ac-
tivated by default with every start-up of
the sweeping system, even if another
sweeping programme was selected be-
fore.
Note
: The selected sweeping pro-
gramme is shown on the display, the
setting is effected by means of the di-
rection keys.
5 Display sweeping programme "MEDI-
UM"
– for normally soiled floors
6 Display sweeping programme
"HEAVY"
– for heavily soiled and uneven floors
7 Display
8 Raise waste container
9 Tip waste container out
10 Swivel in the waste container
11 Lower waste container
12 Confirmation key "OK"
13 Horn
14 Program selection switch
Note
: Functions are only activated when
the main switch is switched on and the KIK-
key is inserted.
A OFF
Device is switched off
B ON
Appliance is ready for operation (en-
gine off)
C Engine starts automatically
Driving to the Place of Use.
With appliances with low emptying sys-
tem:
Roller brush and side brushes are lifted
and turning.
With appliances with high emptying
system:
Roller brush and side brushes are
raised and switched off.
D Sweeping with sweep roller
Roller brush is lowered.
E Sweeping with roller brush and right
side brush
Roller brush and right side brush are
lowered, the sickle brush (optional) is
activated.
F Sweeping with roller brush and right
and left side brush
Roller brush, right side brush and left
side brush (optional) are lowered, the
sickle brush (optional) is activated.
The default language on the display is Eng-
lish.
Select the desired language on the control
panel prior to working with the machine.
How the language is set for the yellow and
grey key (Intelligent Key) is shown in the il-
lustrated brief instructions on Page 2 of
these operating instructions or in the follow-
ing Chapter "Intelligent Key yellow/grey".
The parameters for the various cleaning
programmes are preset. The indication
takes place on the display.
The texts on the display are plain texts and
therefore self-explanatory. The selection of
the desired sweeping program is made by
means of the direction key "to the right".
Shown display texts are:
>
Operating hours and sweeping pro-
gramme
<
>
Usability of the roller brush: .. %
<
>
Day counter .. h .. min
<
Extra with upgrade kits:
>
Switch on beacon light
<
>
Switch on working light
<
If you wish to permanently change the pa-
rameters, you must use a grey intelligent
key to make the settings. The procedure is
described in section "Grey intelligent key".
With the grey intelligent key the authorisa-
tions for the yellow intelligent key are ena-
bled.
Parameters that are adjusted with the grey
Intelligent Key, are kept until another set-
ting is selected.
Insert the grey intelligent key.
Push the direction key "upwards" or
"downwards" until the >
key manager
<
menu appears.
Note
: In this menu item the authorisa-
tions for the yellow intelligent key are
enabled.
Confirm the message with the "OK"
key.
Remove the grey intelligent key and
within the seconds being counted down
insert the yellow intelligent key that is to
be personalised.
Push the direction keys "upwards" or
"downwards" and select menu items.
Available menu items are:
Operating field
Program selection switch
Language setting on the control
panel
KIK-key (Kärcher Intelligent Key)
yellow/grey
Yellow KIK-key
Grey KIK-key
Available menu items are:
>
Language selection
<
18 languages are available in the language
selection, among others German, English,
French, Spanish, Greek and Russian.
>
Device operation locked/enabled
<
The yellow KIK-key can be locked for the
operation of this machine here.
>
Sweeping track locked/enabled
<
With a locked sweeping track the sweeping
programme ECO, MEDIUM or HEAVY is to
be set and cannot be changed by the oper-
ator. With an enabled sweeping track you
can change between the 3 sweeping pro-
grammes during operation.
>
Dust level locked/enabled
<
Adaption of the automatic filter cleaning
(TACT) to the environment.
>
Light on/off
<
The operator can switch on the light (op-
tional).
>
Light locked/enabled
<
Continuous operation with light is activated
or locked.
>
Flashing beacon locked/enabled
<
The operator can choose whether he or
she wants to drive with or without the flash-
ing beacon; when starting the device, the
flashing beacon is on automatically.
>
Flashing beacon mode locked/ena-
bled
<
It can be selected whether the flashing
beacon is necessarily on (even if it has
been switched off by the operator) or not.
>
Speed locked/enabled
<
Without function
>
Sweeping speed locked/enabled
<
Without function
34
EN
Summary of Contents for KM 105/100 R D
Page 2: ...2 ...