Kärcher BR750 BAT Package, Operating Instructions Manual, Page: 37 / 510

English Operating Instructions
37
Information:
Do not use detergents which foam
vigorously.
„
Open the cover.
„
Fill with fresh water (maximum 60 °C) up
to the lower edge of the filler inlet
„
Add detergent.
Comply with the metering information.
„
Close the cover.
Recommended detergents
Detergents are available from specialist
outlets.
Setting the water flow rate
BR 750
„
Turn the info button clockwise until
"Wasser:..." or "Water:..." is displayed.
„
Shortly press the info button - display
blinks.
„
Set the water quantity by turning the info
button. The number of black bars indica-
tes the water quantity.
„
Press the info button to confirm the set
value.
BD 750
„
Set the water flow rate using the water
quantity buttons (+, -) according to the
dirt on the floor covering.
Information: If the water quantity is
set to "0", then the water pump swit-
ches off automatically
Switch on/off water supply
„
Switch on and off with the buttons (+, -).
Information:
Start cleaning on a low water flow
rate. Gradually increase the water flow rate
until the desired cleaning result is obtained.
Lowering the suction bar
„
Press down the lever; the suction bar is
lowered and the suction turbine is
switched on.
Application: Detergent
Maintenance cleaning
(also for alkaline-sensitive
floors) RM 745
RM 746
Cleaning greasy dirt
deposits RM 69 ES ASF
RM 69 ASF
Basic cleaning
(stripping) alkaline-
resistant hard floor
coverings
RM 752
Basic cleaning
stripping linoleum
RM 754
Sanitary cleaner RM 25 ASF
Disinfectant cleaner RM 732
i
i
-
+
i