Kärcher AB 84, Instruction Manual

Page: 8 / 120

-
2
–
This blower is meant for drying carpets/
carpet floors that have been wet-
cleaned.
–
This device is exclusively meant for in-
dustrial and commercial use.
Any use extending beyond this is not con-
sidered as proper use. The manufacturer is
not liable for any losses resulting from this;
the user alone bears the risk for this.
1 Transport handle
2 Fastener for transport handle
3 Power cord
4 Bearing wheel
5 Clamping part with cross-handles
6 Blower
7 Handle
8 Power switch
Î
Install the transport handle.
Note: When installing the appliance, en-
sure that the blower grid is free and does
not have any objects in front of it.
Î Open doors and windows as wide as
possible to improve the ventilation.
Î Place the device on the carpet to be dried.
Î Lift the carpet.
Î Push the carpet under the clamping
part of the device and fasten it by turn-
ing the cross-handles.
Î Plug in the main plug.
Î Turn on the appliance.
Î Turn off the appliance.
Î Pull out the mains plug.
Proper use
Device elements
1
2
3
4
5
8
6
7
Start up
Operation
Drying the carpet from the top
Drying the carpet from below
Power switch
OFF Off
3 Maximum output
2 Medium output
1 Minimum output
Turning on the Appliance
Shutting down
OFF
1 3
2
8 EN