Note:
Note:
5.Power line connection
protective box
host machine box
wire
cover of battery box
battery box
preparing
battery
wiring
1.Remove the protective box
2.AC type: connect the reserved wire on the host
power box with 220V power supply, and tie the
wire head with electrical tape
3.Direct waste type: take out the DC battery box,
remove the cover, install four No. 5 dry batteries
in the direction, and install the battery box cover
into the host machine after tightening it
4.AC / DC type: install the AC power supply and
DC power supply at the same time according to
the above method.
5.Connect all butt joints
（As shown in the left figure）
6.Gap filling, tiling, urinal installation
1.Installation method of top water inlet
2.Back water inlet installation mode
ceramic tile
protective box
Connect to
the elbow
Install the protective
box, fill the gap with
cement and paste
tiles
the ceramic tile surface
cannot be lower than
the top surface of the
protective box
Water outlet joint
Bevel nut
L shaped elbow
Decorative cup
I-shaped glue
urinal
Installation steps
a
. Insert the I-shaped glue into the lower
nozzle of the urinal
b
. Put the decorative cup on the elbow
c
. Insert the L shaped elbow into the
I-glue
d
. Fix the splay elbow on the water outlet
joint with a beveled nut
e
. Cover the decorative cups respec-
tively
Bevel sealing ring should be put into
bevel nut
branch pipes
supply pipe
host machine box
metal hose
urinal draining pipe
Install the protection box after connecting the wires and
circuits. Fill the gap with cement.The channel containing
the metal hose cannot be filled with cement，as the
metal hose should be able to stretch freely.
KARAT URINAL SENSOR
