Page 88 of 101
DWG ID: 181-0101-00A
Date: 2003-09-26
RESET
immediate
This command is used to perform a soft reset. The MHEARD log is not cleared. Any
existing connections, which are not conpermed, will be lost, even though the other station
still indicates a connection to your station. The initial sign-on message will be displayed.
See also: intface, maxusers, myremote, and restore
RESTORE
immediate
When the RESTORE command is given, the TALON will revert to its factory default
settings (losing all previously PERMed settings), and start its AUTOBAUD routine. It
will then need to be initialized (by pressing the * to set its interface baud rate, and
entering a callsign.)
See also: reset
RETRY n
(n = 0 - 15)
default 10
This command specifies the number of packet retries. Packets are re-transmitted n times
before an operation is aborted. The time between retries (when no acknowledgment is
received) is specified by the command FRACK.
See also: ax25l2v2, frack, relink, and tries
RING {ON | OFF}
default ON
When ON, three bell characters ($07) are sent to the terminal with each “***
CONNECTED TO” message (when another station initiates the connect).
RNRTIME n (n = 0 - 255)
default 0