MODEL :
JL-725
1.
AUTO/ON/OFF
SWITCH
2. LED
CLOCK
DISPLAY
3.
LED
INDICATOR
FOR "AUTO"
4. SNOOZE/
SLEEP
-
OFF
BUTTON
5. ALARM
SET/OFF
BUTTON
6. TIME SET
BUTTON
7. SLEEP SET
BUTTON
8.
(
DIMMER
) LOW/HIGH SWITCH
9. HOUR
BUTTON
10. MINUTE
BUTTON
11. VOLUME CONTROL
KNOB
12.
AM/FM SWITCH
13. TUNING CONTROL
KNOB
14. BATTERY
COMPARTMENT
15. FM
PIG-TAILED
WIRE
16. AC POWER CORD
17.
AM/FM
SCALE &
POINTER
18. PROJECTION ON/OFF
BUTTON
19.
CLOCK
PROJECT
OR
20. TIME SET BUTTON FOR PROJECTION
21. HOUR BUTTON FOR PROJECTION
22. MINUTE BUTTON FOR PROJECTION
23. FOCUS ADJUSTM
ENT
KNOB
24.
RADIO/BUZZ SWITCH
AC POWER OPERATION
Before conneting to the power
supply
,
ensure that the supply corresponds to the information on the
rating label on the bottom of the apparatus.
WARNING
S
Disconnect the
power
plug from the
receptacle
when not in use. To avoid the risk of electric
shock,
do not remove the cover of the apparatus. There are no user serviceable parts inside. To prevent
fire or
shock
hazard
,
do not expose the apparatus to rain or moisture.
TO SET THE
CLOCK
TIME
1. Set the ON/OFF/AUTO switch (1) to
'
OFF
'.
C
onnect the
power cord
to the power supply. The clock
display will
blink to
indicat
e
a power interruption and that the display time is incorrect.
2. To set the correct
time,
press
the
MINUTE button
(10) or HOUR button (9) until the correct
time is displayed
while pressing and holding the TIME SET button (6)
.
3.
Open the Battery
Compartment
cover
and fit a 9V battery. The purpose of this battery is to
store the information relating to
the
alarm time
a
nd to keep
the clock function
ing
in the event of
disconnection from the
power
supply or power interrruption.
In case of the power failure, t
he clock will
continue to keep time
but will not display
it
.
THE LED DIGITAL CLOCK AND THE PROJECTION
CLOCK MUST BE SET SEPARATELY
TIME SETTING FOR PROJECTION
- To
set
HOUR
, press simultaneously the HOUR BUTTON (21) and the TIME
SET
BUTTON
(20).
K
eep
them depressed until the
correct
hour
is
displayed.
- To
set MINUTE
, press simultaneously the MINUTE BUTTON (22) and the TIME
SET
BUTTON (20).
Keep them depressed until the
correct
minute
is
displayed.
- Focus setting : To adjust the projection
focus,
turn the
FOCUS ADJUSTMENT KNOB
(23) until
the projected
time
is clearly shown on the ceiling or wall.
NOTE
:
THE MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
2
5
.
LED INDICATOR FOR "PM"
