3. Measurement Mode
19
Display Key
Procedure
START/STOP
(5)
ready
will be displayed indicating that the instrument is ready
to start a measurement.
Press
START/STOP
key to start sampling.
☆
To go back to the measurement setting screen
(a)
, press
△
key.
[Start
Measuring]
(6)
(6-1)
Measuring at one point.
(6-2)
After measuring at one point is finished, move the probe to the next
point and press
START/STOP
key. Then measuring at the next point
will start.
★
Repeat the above procedure (6-1) and (6-2) for the configured
number of sampling points.
START/STOP
START/STOP
☆
To stop measuring halfway through:
▽
key.
-
While sampling at a point, the sampling at the point will be
finished.
-
When the instrument is waiting for the next sampling, the data
taken before the measurement stopped will be calculated.
☆
To stop a measurement (1) :
△
key
-
Will go back to the measurement standby mode (screen (b))
☆
To stop a measurement (2) :
MENU
key
-
Will go back to the menu screen.
[Calculation
Result]
☆
: hardcopy of the display screen
☆
START/STOP
or
▽
: ready for measuring (to continue sampling)
☆
MENU
: menu will be displayed.
NEXT START! --- waiting for sampling at the next point.
POINTS 001/016
--- No. of Points
setting value
No. of points where sampling has been done
<FLOW RESULT>
8.100 m3/min
486.00 m3/hour
VEL 13.5 m/s
TEMP 126 ℃
Air volume (m³/m)
Air volume (m³/h)
Avg air velocity
Avg air temp
(b)
(6-1)
[Measurement Condition]
POINTS:
Set how many points to perform a measurement to find average air velocity?
Configurable number of partitions: 1 ~ 100 points
AREA(m²): Duct’s cross section area (Effective Area)
Configurable area size: 0.001
～
9.999m²
* For S-TIME(S), DATA(N), MEMORY, PRINT, refer to page 15 describing the average
measurement.
< FLOW >
ready
T: 00/10 M:036
N: 000/010 P:012
16.8 m/s
126 ℃
< FLOW >
T: 01/10 M:036
N: 001/010 P:012
16.8 m/s
127 ℃
< FLOW >
NEXT START !
POINTS 001/016
16.8 m/s
127 ℃
< FLOW >
T: 10/10 M:037
N: 001/010 P:012
16.8 m/s
126 ℃
Summary of Contents for Anemomaster 6162
Page 4: ......
