![Kanomax Anemomaster 6162 Operation Manual Download Page 21](http://html.mh-extra.com/html/kanomax/anemomaster-6162/anemomaster-6162_operation-manual_652665021.webp)
3. Measurement Mode
15
△
,
▽
SET
(7)
After measurement condition is set, select
5. SET OK!
.
Then press
SET
key.
START/STOP
(8)
ready
will be displayed indicating that the instrument is ready
to start a measurement.
Press
START/STOP
key to start sampling.
☆
To go back to the previous screen (measurement condition
setting screen) press
△
key.
[Start
Measuring]
[Stop
Measuring]
[Calculation
Result]
Printing
Example
"
P24
☆
To stop measuring halfway through:
START/STOP
or
▽
key.
- The data collected until the measurement is halted will be
calculated.
☆
To cancel measuring (a): Press
△
key.
- It will go back to screen (a) where the instrument is ready to
start a measurement.
☆
To cancel a measurement (b): Press
MENU
key.
- It will go back to the menu screen.
☆
: hardcopy of the display screen
☆
START/STOP
or
▽
: ready for measuring (a)
☆
MENU
: menu will be displayed.
S-TIME (S): Set the length of sampling (instantaneous value) time.
Configurable sampling time (sec): 1 ~ 6, 10, 12, 15, 20, 30, 40, 50, 60 sec
DATA (N):
Set how many data to be taken every configured sampling time.
Configurable number of data: 1 ~ 6, 10, 12, 15, 20, 30, 40, 50, 60, 100, 120, 150, 180
MEMORY: When
YES, data will be stored in the internal memory.
For details on memory capacity, refer to P22.
PRINT:
When YES, the calculation result will be output to the printer automatically.
When NO, you can still print out the hardcopy of the calculation result by pressing
key
after the calculation result is displayed.
Refer to P24 for printout samples.
[
Measurement Condition]
(a)
T:01/10
···
S-TIME(S)
M:015
--- used memory (shown in %. When it shows 100 (%),
there is no memory left.)
N:001/060
···
DATA (N)
P:007
--- the page number where the data is stored
"
P22
If
3.MEMORY NO
is selected, it will not be displayed.
setting value (sec)
will be increased every second
setting value
will be increased every time data is collected.
3. MEMORY NO
4. PRINT NO
5
. SET OK!
<AVE>
ready
T: 00/10 M:015
N: 000/010 P:007
16.8 m/s
127 ℃
<AVE>
T: 01/10 M:015
N: 001/060 P:007
16.8 m/s
127 ℃
<AVE>
T: 10/10 M:016
N: 060/060 P:007
12.8 m/s
126 ℃
<AVE RESULT>
AVE: 12.8 m/s
MAX: 15.8 m/s
MIN : 10.8 m/s
AVE: 126 ℃
MAX: 129 ℃
MIN : 123 ℃
Summary of Contents for Anemomaster 6162
Page 4: ......