Kanguru BR-DUPE User Manual Download Page 59

Page: 59 / 81

Chapter 4. Warranty and Tech Support

Warranty

This product carries a 1 year* limited warranty on the power supply, controller, and all internal components.

The warranty does not cover any IDE, SATA, or Power cables. Kanguru Solutions is not responsible for

any damages incurred in the shipping process. Any claims for loss or damage must be made to carrier

directly. Claims for shipping errors should be reported to Kanguru Solutions within three (3) working days

of receipt of merchandise. Please refer to the RMA Procedure section of this manual if your duplicator

needs servicing.

Kanguru Solutions does not offer money back returns on its duplicator product lines due to the unique nature
of the product. All units will be fully supported under manufacturer’s and/or extended warranty plans.

Tech Support

If you experience any problems installing your Kanguru product or have any technical questions regarding

any of our products, please call our tech support department. Our tech support is free and available Monday

thru Friday, 9am to 5pm EST.

Call 1-508-376-4245

Or visit our website at

www.Kanguru.com

Warranty and Tech Support

Summary of Contents for BR-DUPE

















































































Search results

Summary of Contents for BR-DUPE

Reviews:

Related manuals for BR-DUPE

Brands by name

Popular brands

Kanguru BR-DUPE, User Manual

Search results

Summary of Contents for BR-DUPE

Reviews:

Related manuals for BR-DUPE

Brands by name

Popular brands