Kanguru BR-DUPE User Manual Download Page 55

Page: 55 / 81

3.16.3 Rename Partition

The Rename Partition function allows you to rename an existing partition/image on the hard drive.

Hard Drive Setup

3. Rename Partition

Choose Partition

[NEW-0001.VEF] 247M

Hard drive is empty

Press ENT to Continue

Rename Partition

[NEW-0002 ] OK?

[NEW-0002.VEF] 247M

Renamed!

1. From the Hard Drive Setup menu, press the UP or

DOWN button to navigate to

Rename Partition

. Press

the ENT button to enter the Rename Partition menu.

2. Press the UP or DOWN button to select a partition on

the hard drive. Press the ENT button to confirm your

selection.

Note:

If you haven’t loaded a Master disc image onto

the hard drive, you will see the

Hard drive is empty

screen. For more information on loading an image

on to the hard drive please see section

“3.16.2 Load

Partition” on page 54

3. The

Rename Partition

screen appears. Enter a new name

for the partition and confirm. For more information on

naming the partition, please see section

“3.2.1 Entering

Names and Numbers” on page 11

You will see the

Renamed

screen appear for 2 to 3

seconds and then you will be returned to the Hard Drive

Setup

menu.

Rename Partition

Summary of Contents for BR-DUPE

















































































Search results

Summary of Contents for BR-DUPE

Reviews:

Related manuals for BR-DUPE

Brands by name

Popular brands

Kanguru BR-DUPE, User Manual

Search results

Summary of Contents for BR-DUPE

Reviews:

Related manuals for BR-DUPE

Brands by name

Popular brands