Kanguru BR-DUPE User Manual Download Page 36

Page: 36 / 81

3.13.2 Duplication Mode

The Duplication Mode setting is for Kanguru Duplicator systems with a hard drive installed. If you purchased

a Kanguru Duplicator with a hard drive installed, the Duplication Mode setting allows you to select how

you want to make disc to disc duplications.

There are three duplication modes:

•

Load and Copy (hard drive models only)

- Allows faster duplication from the hard drive by

simultaneously copying to the blank media in the writer drives while loading an image of the master

disc to the hard drive. Starting from the 2nd round of duplications, all subsequent copies will be

created using the master image loaded onto the hard drive as the copy source. The image will be

loaded onto the RES.VEF partition. If there is already an image on the RES.VEF partition then this

will copy over the existing image.

•

On the Fly (default)

- Instructs the system to copy directly from the master disc. When using On the

Fly mode, no information is stored on the hard drive.

•

Prompt (hard drive models only)

– The system will ask you to select the Duplication Mode prior to

performing a copy process.

Note:

If your system did not come with a hard drive installed, you will be able to enter the

Duplication

Mode

menu, but you will only be able to select

On the Fly

Setup

2. Duplication Mode

Duplication Mode

On The Fly

1. From the Setup Menu, press the UP or DOWN button to

navigate to

Duplication Mode

. Press the ENT button to

enter the Duplication Mode

menu.

2. Press the UP or DOWN button to select a Duplication

Mode. Press the ENT button to confirm your selection.

You will exit to the Setup

Menu.

Duplication Mode

Summary of Contents for BR-DUPE

















































































Search results

Summary of Contents for BR-DUPE

Reviews:

Related manuals for BR-DUPE

Brands by name

Popular brands

Kanguru BR-DUPE, User Manual

Search results

Summary of Contents for BR-DUPE

Reviews:

Related manuals for BR-DUPE

Brands by name

Popular brands