Kanga 8D Series, Operator'S Manual

Page: 72 / 76

72
TROUBLE PROBABLE CAUSE REMEDY
Machine will not drive forwards
or backwards.
Hydraulic system oil low.
Check oil and replenish as
necessary. Oil level should not
change. Leaks may be present.
Worn Control Valve spool.
Check pressure delivery from
Control Valve. Repair or replace
valve as required.
Damaged or blocked line.
Remove line and remove any
obstructions or replace line
as necessary.
Control rod or lever broken or
disconnected. Repair or replace control rod
or lever.
Hydraulic lines incorrectly
connected at Control Valve. Correctly connect line at
Control Valve.
Malfunctioning pump. Repair or replace pump.
Machine drive speed is erratic. Hydraulic system oil low.
Check oil and replenish as
necessary. Oil level should not
change. Leaks may be present.
Damaged or blocked line.
Remove line and remove any
obstructions or replace line
as necessary.
Binding drive motor(s).
Repair or replace motor(s)
as necessary.
Relief valve setting. Adjust relief valve.
DRIVE SYSTEM
TROUBLE PROBABLE CAUSE REMEDY
Engine will not crank over. Low battery output. Recharge or replace battery.
Loose, disconnected or broken
battery cables. Inspect cable(s) and tighten all
connections. Repair or replace
cables as necessary.
Faulty Starter. Repair or replace starter.
Faulty circuit wiring. Check wiring continuity.
Engine cranks but not fires.
No fuel in tank. Refill fuel tank.
Dirty fuel filter. Clean filter.
No engine oil pressure Check engine oil level
Engine coolant temperature Check coolant level
Engine runs but stalls. Fuel valve closed. Open valve.
Low battery output. Recharge or replace battery.
Power take-off engaged. Shift power take-off lever
into neutral.
ENGINE