Kanga 8D Series, Operator'S Manual

Page: 50 / 76

50
SERVICE TASKS - HYDRAULICS
HYDRAULICS
Perform the following work after every 100
operating hours:
HYDRAULIC OIL LEVEL
The hydraulic oil should be checked cold with
the main arms in the lowered position with rams
closed the oil level should be on the lower mark,
the upper mark is for when checking oil level
when hot.
NOTE: A significant drop in fluid levels will
indicate leakage.
Inspect all hydraulic hoses, tubes, fittings, valves and rams for leaks and damage. Tighten loose
fittings and replace damaged components. Check all three pressure settings (see procedure on
opposite page). Adjust if necessary.
HYDRAULIC FILTERS
Replace the return line filter after every 200 operating hours. Service the pressure filter after every
500 operating hours.
(Pressure Filter Element Part No: KS-000381; Return Filter Element Part No: HA-000400)
PRESSURE FILTER
(Illustration shows housing)
RETURN LINE FILTER