Kanga 8D Series, Operator'S Manual

Page: 15 / 76

15
FIVE STEPS TO EFFECTIVE JSEA
1
DOCUMENT THE ACTIVITY
Assemble those involved in the activity and then, using the JSEA worksheet, write
down in step by step form, the tasks that make up the activity.
2
IDENTIFY THE HAZARDS
Next to each task, identify what part of the task may cause injury to those engaged
in the task or others in the vicinity.
3
DOCUMENT THE CONTROL MEASURES
For each identified hazard, assess the associated level of risk to those involved, and
then list the control measures required to eliminate or minimise those risks.
4
IDENTIFY WHO IS RESPONSIBLE
Document the name of the person responsible for implementing the
control measure.
5
MONITOR AND REVIEW
Ensure that the activity is supervised and that the documented process is being
followed. The documentation should be reviewed whenever a documented activity
changes or when there is a change of personnel or after an appropriate length
of time.
NO GO ZONES FOR UNDERGROUND UTILITY SERVICES
No work is to commence on any worksite until you have checked if it contains underground
services. Here is how you can find out.
• The “Dial Before You Dig” service (in Australia),
dial 1100
, provides free and easy access
to the records of a large number of organizations, including telecommunications, water,
electricity and gas.
• To see a list of organizations registered with the service or to log an enquiry electronically, visit
the Dial Before You Dig website at www.1100.com.au , or telephone 1100 (otherwise consult
with your local environment department).
If underground services are present, you must comply with the No Go Zones.
If the worksite contains or is suspected to contain ANY underground services, before any work
commences, you must follow the relevant No Go Zone safety procedures:
• No Go Zone safety procedures are available from all gas, water, telecommunications, and
electricity companies.