Kanga 8D Series, Operator'S Manual

Page: 68 / 76

68
* Net power the Power rating of the engine indicated in this document is the net power of the production engine only and is measured in accordance with SAE
J 1349 at 3600 Rpm, Mass production engines may vary from this value, Actual power output for the engine installed in the final machine May vary depending
on numerous factors,including operation speed of the engine in application, environmental conditions and other variables.
SPECIFICATIONS - 8 SERIES
PERFORMANCE DT835 (TRACKED)
Max. Lift Capacity 360 kg 793 lbs
Travel Speed 5.4 - 9.3 km/h 3.4 - 5.8 mph
Rated operating capacity (ROC) with 75kg operator 225 kg 495 lbs
Rated operating capacity (ROC) without operator 185 kg 405 lbs
Tipping load with 75kg operator 450 kg 990 lbs
Tipping load without operator 370 kg 810 lbs
Operating Weight (Machine Only) 1120 kg 2469 lbs
Fuel Capacity 50 L 13.2US gal
ENGINE
Manufacturer Kubota V1505 Diesel
SAE Gross Power intermittent 26.5 kW 35.5 hp
Torque 73Nm 53.8 lbs-ft
DRIVE SYSTEM
Drive Control Soft Touch Hand Levers
Throttle Control Hand Levers
Tracks/Wheels Tracks, Direct Drive Hydraulic Motors
All Wheel Drive System Yes, Optional 2 Speed
Wheel Diameter 10 x 5 Track Over Wheel
HYDRAULICS
Nominal Pump Output @ 3000rpm 50 L/min 13.2 US gal/min
System Pressure 220 bar 3200 psi
Hyd. Reservoir Capacity 82 L 21.6 US gal
Hyd. Oil Grade ISO68
Hyd. Fitting 1/2” NV Nipple Style
BUCKETS
4 in 1 Bucket Capacity 0.15 m3 5.3 cu.ft
DIMENSIONS
A Max Operating Height 2597 mm 101.18”
B Height to Hinge Pin 2057 mm 79.90”
C Overall Height 1398 mm 55.19”
D Overall Length With Bucket 2236 mm 87.80”
E Overall Track/Wheel Width 1046 mm 41.10”
F Bucket Reach at 40º 189 mm 13.80”
Bucket Max Reach (Level) 1090 mm 42.90”
G Dump Height 4 in 1 Bucket (Ok60028) 2080 mm 81.89”
H Bucket Width 1100 mm 41.30”
I Bucket Max Roll Back 40º
J Bucket Max Dump Angle 59º
K Ground Penetration 507 mm 19.6”
L Overall Length Less Bucket 1641 mm 67.7”
M Ground Clearance 194 mm 7.63”
N Angle of Departure 35º