Kanga 8D Series, Operator'S Manual

Page: 41 / 76

41
VISUAL CHECK
1. Damage.
2. Loose bolts/nuts.
3. Rust.
4. Leakage oil or water.
5. Wiring / oil cooler connection.
6. Paint work
7. Any untidy weld spots or runs.
8. Check of fittings alignment.
9. Is Loader clean and tidy?
10. Are pipes and hoses clear of parts on Loaders?
11. Are Hershel plugs clear of tank & hydraulic lift tubes?
SERVICE
1. Tie down lugs fitted on body.
2. Correct Attachment Plate/ operation ok with test jig.
3. Lubricate Loader, grease all linkages.
4. All pins and bushes fitted and tight.
5. Belt tension fan/alternator.
6. Wheel condition/wheel nuts been tensioned 100 ft-lb.
7. Is the track slot forward and tyre direction correct?
8. Is the tyre pressure to specification?
9. Radiator core, hoses and fittings.
10. Air element and hose clearance and connections tight.
11. Sediment in fuel filter/tank (drain fuel tank).
12. Is engine EPA compliant?
13 Is PTO direction correct?
14. Are QRCs correctly aligned and covers fitted?
15. Spare key fitted correctly to machine.
16. Ensure battery is secure and boot is on alternator.
17. 8 Series U-Beaut bracket stop bolt fitted.
18. Is the Splash Plate fitted?
19. Check oil cooler connection to fan.
20. Ensure control knobs are not split and are secured.
21. Is the Control Knob on Trencher Valve clear of guard?
OPERATIONAL CHECK
1. Gauges/switches and connections/dash lights.
2. Attachment Plate.
3. Throttle Lever (not too tight or loose).
4. Levers and linkages working correctly.
5. Unusual noises or vibrations.
6. Petrol/ Diesel engine
Idle
1350-1450 / 900-1000rpm.
7. Petrol/ Diesel engine max 3550-3650 / 3800-3850rpm.
8. Is Loader easy to start?
9. Is Hour Meter working? Test time = hrs.
10. Check that lift cylinder stops in correct position.
11. Aux stop cable, check cable length is correct & test
operation 5 times.
GUIDANCE
1. Correct stickers applied (UK C/E sticker).
2. Correct Tyre Pressure sticker attached.
3. Identification Plate -(correct number stamped).
4. Safety/Operating USB.
5. Track Tool (Series 7-8).
6. Engine Manual Warranty.
FLUID COMPARTMENT CHECK
1. Battery condition.
2. Engine oil level.
3. Hydraulic oil level.
4. Fuel level.
5. Inspect fuel tanks for leaks.
6. Hydraulic filter housing directions and elements tight.
7. Radiator water level (Diesel).
OTHER
1. Is the “Passed By” sticker attached and signed?
2. Check machine to be shipped against order.
3. Is the Loader ready for despatch?
4. Ensure diesel Loader has oil funnel.
5. Have back protection bars been ordered and fitted?.
6. Lights/Beacon operational (Where Fitted).
7. Horn/ Reverse beeper operational (Where Fitted).
8. Rear Legs Operational (Where Fitted).
LOADER CHECKLIST
MODEL:
SERIAL No.:
ENGINE No.:
INSPECTOR’S NAME:
MACHINE BUILT BY:
DATE:
“Received the above Loader, attachments and documentation as stated above in good condition. The correct operation of the
Loader has been explained to our satisfaction. We understand that this Loader should be operated by a properly trained operator.
We are aware that the use of this Loader in any manner or place for which it is not designed will render it unsafe.”
DISTRIBUTOR’S NAME: INSPECTOR’S SIGNATURE: