Kanga 8D Series, Operator'S Manual

Page: 26 / 76

26
LEVER POSISTION
LEVER PUSH FORWARD PULL BACKWARDS FUNCTION
1
AUX 1 attachment
reverse
AUX 1 attachment
forward
This is the main Auxiliary A and B port outputs.
Used for most attachments other than 4-in-1
bucket.
2
4-in-1 Bucket
open
4-in-1 Bucket
close
Controls the 4-in-1 bucket and other more
complex attachments with hydraulic motors
and cylinders. These include stump grinders,
rotating log grab, six-way angle blade, and
tilting buckets.
3
Main lift arm control
lower
Main lift arm control
raise
This is the main function of the mini loader.
4
Left drive
forward
Left drive
reverse
Used to manuever the loader; can be used
alone or in conjunction with right hand drive.
5
Right drive
forward
Right drive
reverse
Used to manuever the loader; can be used
alone or in conjunction with left hand drive
6
Attachment tilt control
forward
Attachment tilt control
backward
Used to keep load level or to dump bucket of
dirt.
7
Throttle
increase rpm
-
up
Throttle
decrease rpm
-
down
For trenching, set throttle at maximum to
maximize hydrualic horsepower.
8
2-speed drive control
slow
-
up
2-speed drive control
fast
-
down
Slow speed produces greater torque. All
attachments should be used in slow speed
except for the 4-in-1 bucket. Fast speed is for
traveling more quickly between dump points,
where less torque is required.
WARNING: Bring loader to a complete stop
before changing speeds.
9
Trenching valve
increase travel speed
Trenching valve
decrease travel speed
Used to control trenching speed. Counter-
clockwise turn increases speed; clockwise
decreases. See Trencher Operating
Instructions for more information.