Kalmar DCF100-45E7, Operator'S Manual

Page: 72 / 88

198 7 Transporting the machine – 7.2.2 Transporting the machine
11 Remove the circlips and lock screws and then remove the shafts
that attach the mast in the frame. Use the threaded holes and a
puller to pull out the shafts.
12 Lift the mast forward and lower it to the ground so that it does not
swing.
13 Mark up and release the hydraulic hoses between the lift cylin-
ders. Collect the waste oil in containers. Oil spills are handled as
environmentally hazardous waste.
14 Lift away the mast, lower the mast onto blocks and angle it down
towards the ground, being careful that the mast’s parts are not
damaged during handling.
15 Lower the tilt cylinders towards the frame and position them onto
blocks. Release the lifting equipment from the cylinder.
16 Refit the shafts in the tilt cylinders and lock them with the circlips
and lock screws.
WARNING
The mast may swing out when it is loosened from the
machine.
Risk of personal injury!
Stand in the mast!
DANGER
The hydraulic connections may become pressurised
when the machine is operated.
Extreme danger, risk of hydraulic oil leakage.
Use plugs that can be pressurised.