Kalmar DCF100-45E7, Operator'S Manual

Page: 51 / 88

5 Handling – 5.5 Load handling 133
5.5 Load handling
page –
General
During all lifting work, it is important to remember to not exceed maxi-
mal lift capacity. Load handling also includes lifting tools.
The machine’s capacity is indicated by three parameters:
• position of load’s centre of gravity
• lifting height
• load’s size
The capacity varies between models and versions, see the machine
and type plates, section
3.2 Plates .
It’s important to estimate the position of the centre of gravity. If the ma-
chine appears to be side-heavy, the load should be lowered and ad-
justed with side shift so that the load’s centre of gravity is moved to a
position along the machine’s centre line.
0
0
8
1
3
8