Kalmar DCF100-45E7, Operator'S Manual

Page: 32 / 88

108 5 Handling – 5.3.3 Error code tables
656/7 SID6/7 Compression malfunction or defective injector cylinder 6.
Rough running at low rpm and low load.
STOP
656/12 SID6/12 Electrical problem, injector cylinder 6. Engine only runs on
5 cylinders and has reduced power.
STOP
677/3
1675/3
SID39/3 Start relay on starter motor, cable short-circuited to voltage or
activated too long. Starter motor does not run.
STOP
677/4
1675/4
SID39/4 Start relay on starter motor, cable short-circuited to frame.
Starter motor does not run.
STOP
677/5
1675/5
SID39/5 Starter motor relay, open circuit on cable or defective compo-
nent. Starter motor does not run.
STOP
679/3 SID42/3 Governor injection pressure, cable short-circuited to voltage.
Risk of engine stop.
STOP
679/4 SID42/4 Governor injection pressure, cable short-circuited to frame. STOP
679/5 SID42/5 Governor injection pressure, cable open circuit. STOP
679/6 SID42/6 Governor injection pressure, cable short-circuited to frame. STOP
679/13 SID42/13 Governor injection pressure. Risk of engine stop. STOP
679/0 PSID97/0 Pressure relief valve. Engine rpm limited to 1100 rpm. STOP
679/7 PSID97/7 Pressure relief valve. Engine is turned off or engine rpm limited
to 1100 rpm.
STOP
679/11 PSID97/11 Pressure relief valve. Engine rpm limited to 1100 rpm. STOP
679/14 PSID97/14 Pressure relief valve. Engine rpm limited to 1100 rpm. STOP
729/3 SID70/3 Sensor preheating, cable short-circuited to voltage. STOP
729/4 SID70/4 Sensor preheating, cable short-circuited to ground. Engine dif-
ficult to start in cold weather.
STOP
729/5 SID70/5 Sensor preheating, cable open circuit. Engine difficult to start in
cold weather.
STOP
1079/3 SID 232/3 Voltage feed sensor engine, cable short-circuited to voltage. STOP
1079/4 SID 232/4 Voltage feed sensor engine, cable short-circuited to frame. STOP
1080/3 PPID 211/3 Voltage feed sensor engine, cable short-circuited to voltage. STOP
1080/4 PPID 211/4 Voltage feed sensor engine, cable short-circuited to frame. STOP
1239/0 PSID96/0 Incorrect fuel pressure injection. Engine rpm limited to
1100 rpm.
STOP
Description Action
Display
SPN/FMI J1587