Kalmar DCF100-45E7, Operator'S Manual

Page: 53 / 88

5 Handling – 5.5.2 Transporting load 143
–
Instructions for sidelift
1 Lift the load slightly. Back away from the stack.
When lifting, the middle light, B – Alignment, (orange), is off. Then
the function for twistlocks is disengaged. The function for opening
lock lugs still works but is disengaged when travel speed exceeds
5 km/h.
2 Adjust load height and tilt angle to transport position, see Trans-
port position page 143 .
–
Transport position
When the machine is to be run with or without load, assume the trans-
port position to minimise the risk of roll-over and imbalance while
operating.
Instructions for sidelift
When transporting, the mast is tilted back and the load is lifted for g ood
forward visibility, see figure to the left. The load’s centre-of-gravity
shall be centred laterally (sideways).
0
0
8
1
1
8
B
C A
0
0
8
1
2
5