Kalmar DCF100-45E7, Operator'S Manual

Page: 71 / 88

7 Transporting the machine – 7.2.2 Transporting the machine 197
6 Connect lifting equipment to outer mast’s lifting eyes. Tension the
lifting equipment so that the weight of the mast is held by the lift-
ing equipment.
7 Connect the lifting equipment to the upper part of the tilt cylinders.
Tension the lifting equipment so that th e upper mountings are
unloaded.
8 Remove the cylinder’s shafts. Use the threaded holes and a pull-
er to pull out the shafts.
9 Release the tilt cylinders from the mast and then refit the shafts
in the tilt cylinders.
10 Adjust the lifting equipment that is connected to the mast so that
the mast’s shafts are unloaded.
DANGER
Lift in the outer mast, the mast’s parts can be
separated.
Extreme danger, risk of crushing injuries.
Ensure that the lifting equipment is connected to the
lifting points on the outer mast.