Kalmar ContChamp DRD S Series, Technical Handbook

Page: 87 / 298

ContChamp DRD-S
Technical Handbook
ECU 2
Elservo
55 S. Grupp 20
9407
04-10
Length adjustment OUT
1. Control lever switches T1 + T4 are used.
T1
2.
T1 to the right.
3. Signal out to S42.16.
4. X55.8.
5. DIG IN S2.09, LE17 lit.
T4
6.
T4 depressed.
7. Signal out to S42.19.
8. X55.9.
9. DIG IN S2.11, LE23 lit.
10. DIG OUT S2.2. LE6 lit.
11. X62.10
12. X69.10
13. Activate solenoid valve, top-lift (loading of hydraulic pump).
14. Signal out from ECU 2 via CAN bus to 791.
15. Conditions: Signal twist-locks released. Control: DIAGNOS
4(8).
Or signal for bypass connection of safety system with S37
(DIG IN S2.58, LE 24 lit)
16. DIG UT 791.2.4 to 6018
REF UT 791.2.18 to 6018
17. 6018 opens for hydraulic feed to the cylinder, length adjust-
ment OUT begins.
Length adjustment IN
1. Control lever switches T1 + T4 are used.
T1
2.
T1 to the left.
3. Signal out to S42.14.
4. X55.7.
5. DIG IN S2.10, LE20 lit.
T4
6.
T4 depressed.
7. Signal out to S42.19.
8. X55.9.
9. DIG IN S2.11, LE23 lit.
10. DIG OUT S2.2. LE6 lit.
11. X62.10
12. X69.10
13. Activate solenoid valve, top-lift (loading of hydraulic pump).
14. Signal out from ECU 2 via CAN bus to 791.
15. Conditions: Signal twist-locks released. Control: DIAGNOS
4(8).
Or signal for bypass connection of safety system with S37
(DIG IN S2.58, LE 24 lit)
16. DIG OUT 791.2.5 to 6019
REF OUT 791.2.19 to 6019
17. 6019 opens for hydraulic feed to the cylinder, length adjust-
ment IN begins.
KL701-D
X69
6018
KL727-D
6019