Kalmar ContChamp DRD S Series, Technical Handbook

Page: 50 / 298

ContChamp DRD-S
Technical Handbook
ECS
Terminal
18 S. Grupp 20
9407
04-10
31. System fault ECU 1.
Contact service as soon as possible.
32. System fault ECU 2.
Contact service as soon as possible.
50. Battery voltage very low/high.
Contact service as soon as possible.
51. Communication with ECU 3 broken.
Contact service as soon as possible.
52. Communication with ECU 1 broken.
First try switching off and then re-starting the engine!
If the fault remains, contact service as soon as possible.
53. Faulty signal from angle sensor
Stop as soon as possible and contact service.
54. Faulty signal from length sensor.
Stop as soon as possible and check the sensor wire.
Contact service if the fault remains.
55. Faulty signal from regeneration sensor.
The regeneration is discontinued.
Contact service.
56. Faulty signal from hydraulic pressure sensors for left lift cyl-
inder. (There is a sensor in both feed and return lines)
Stop as soon as possible and contact service.
57. Faulty signal from hydraulic pressure sensors for right lift cyl-
inder. (There is a sensor in both feed and return lines)
Stop as soon as possible and contact service.
31
32
50
51
52
53
54
55
56
57
-
-
07
60
60
60
60
50, 60
50, 60
50, 60